Like most RVers, you take pride in keeping your vehicle in excellent condition. That means regular maintenance and repairs, even if they’re small. Window problems are usually a quick and easy process!
In this article, we’ll walk you through the steps of easy RV window replacement so you can get back on the road in no time.
Gather all materials you need
First, you’ll need to gather the materials you’ll need for the job. This includes new windows, sealant, and a few tools. You can find all of these at your local hardware store or online. Once you have everything, it’s time to get started!
Remove a window from the RV
Most RVs have windows that you can remove for cleaning or replacement. To remove the window, you may follow these steps:
1. First, use a putty knife to scrape off any old sealant.
2. Next, unscrew any screws or bolts holding the window in place. Finally, lift the window out of the opening.
3. If you’re having trouble removing the window, you may need to use a pry bar or other tool that would help to lose it.
Be mindful not to damage the surrounding area when doing this. Once the window is out, you can clean the opening and install a new window if needed.
Measure RV windows
It would be best to consider a few things when measuring RV windows.
1. You need to determine the size of the window opening. It is the space where you will install the new window.
2. You need to measure the width and height of the window itself.
3. You need to consider the thickness of the window frame.
-
Measure the Window Opening
To measure the size of the window opening, you will need to measure the width and height of the rough opening. You will need to measure from the inside edge of the window frame to the outside edge.
-
Measuring the Width
To measure the window’s width, you will need to measure from the inside to the outside edge of the window frame. You will need to measure from the top of the window opening to the bottom to do this.
-
Measuring the height
To measure the window’s height by measuring from the left side of the window opening to the right side of the window opening.
Once you have these measurements, you need to list them together and then subtract the thickness of the window frame. The thickness of the window frame is usually between one and two inches.
Install the RV window
Installing a window in a travel trailer is not as difficult as one might think. With some essential tools and knowledge, most people can do it themselves.
Here are the steps to take to install a window in a travel trailer:
1. Remove the old window by loosening the screws that hold the window in place. You may also need to remove any caulking or sealant around the perimeter of the window.
2. Clean up the area where the old window was located. Be sure to remove any dirt, dust, or debris so that the new window will have a clean surface.
3. Install the new window. Begin by holding the new window in place and screwing it into the opening. Be sure to use screws that are long enough to go through both the window frame and the wall of the travel trailer.
4. Once the new window is securely in place, you can add caulking or sealant around the perimeter, if desired.
Things to Consider When Replacing RV Windows
1. One of the most important things to consider for an easy RV window replacement is the type of window you want.
2. There are different types of RV windows in the market today. But the three most common replacement windows for RVs are single pane, double pane, and triple pane.
- Single pane windows are the most basic and least expensive, but they don’t provide much insulation.
- Double pane windows are more expensive, but they offer better insulation.
- Triple pane windows are the most costly, but they offer the best insulation.
3. Another vital thing to consider is the size of the window. RV windows come in various sizes, so you’ll need to measure the opening before purchasing a replacement window. Make sure to measure both the width and the height of the opening.
4. You need to decide what type of material you want your replacement window to be made from. The most common materials used for RV windows are glass, acrylic, and polycarbonate.
- The glass window is the most expensive option, but it’s also the strongest and most durable.
- Acrylic is less costly, but it’s not as strong as glass.
- Polycarbonate is the least expensive option, but it’s also the weakest and most prone to damage.
5. You’re ready to purchase your replacement RV window, considering these factors. Measure the opening carefully and choose a window that will offer the best insulation for your needs. With a little bit of planning, you should be able to easily replace your RV windows and enjoy many years of use.
Where to get an RV Window?
There are a few different ways that you can go about getting an RV window. You can purchase one from a retailer or order one custom-made. If you decide to buy a window from a retailer, ensure you have the right and complete measurement of your RV opening to get the right size.
If you order a custom window, you will need to provide the measurements to the supplier, who will take care of it. Then, they will deliver the finished product to you, ready to install.
One trusted supplier for easy RV window replacement is the Motion Windows. The company has offered high-quality glass windows that you can use for your RV.
If you need a glass window for easy RV window replacement, call Motion Windows today!